Levels of Access Control through Keycloak Part 1: Token Authentication

Photo by Life Of Pix from Pexels

This is part 1of a 4-part series on Keycloak. For part 2, click here

A few years ago when I was introduced to the world of microservices for the purpose of looking into token authentication, I stumbled across Keycloak. Keycloak is an open-source identity and access management service maintained by JBoss, a division of Red Hat. Keycloak comes with a plethora of features that do take some time to get familiar with. Some of these features, such as OpenID Connect, RBAC, and Authorization services are very useful for the security needs of modern microservices. This 4-part series is for those who want to rapidly ramp-up their know-how of these crucial features. We’d be covering token-based authentication, authorization flow, access control, and authorization services through Keycloak with example use cases. I’m going to use python for rapid prototypes and proof of concepts.

The Setup

You’d need a running Keycloak instance. The easiest way to bring it up is by running its docker container. To do so, first install docker and then run the following:

docker run -d -p 8080:8080 -e KEYCLOAK_USER=admin -e KEYCLOAK_PASSWORD=password — name keycloak jboss/keycloak:10.0.2

This runs the Keycloak version 10.0.2 in a docker container and binds it to port 8080 of your machine. Once the Keycloak service has fully booted up, it will be available at http://localhost:8080/auth/. Open up this URL in a browser and you’d see the Keycloak homepage. Click on Administration Console and use the following credentials to log in:

Username: adminPassword: password

We specified these credentials above as environment variables to the docker container when we ran it. Once you log in, you’re redirected to the realm administration console. A realm is like a context, a tenancy, or a container. It can represent an organization and any user, groups, or roles related to an organization can reside in a realm. A better way to explain it would be to say that normally, one realm must have users with unique usernames but two users with the same username can exist in different realms. They would be two different users. When you log in with the credentials above, you’re redirected to the administration console of the master realm. This is the central realm that manages all the other realms. You can create a new realm by hovering on the Master in the navigation panel on the left and click on Add Realm

Adding a new realm

I’ll be working on a new realm called test.

Keycloak stores its configuration data in a JDBC supported database and when no external database is specified, runs with an embedded H2 instance which is sufficient for our use case. The H2 database is destroyed when the Keycloak docker container is deleted.

Token-Based Authentication

I’m going to start with building a REST server in python using falcon. We want the REST API to be only accessible to authenticated users from Keycloak. To achieve this, we need to create a client entity in Keycloak. We can do this by clicking on Clients and then clicking on Create button:

Click on Create for new client

In the Add Client view, you just need to provide the Client Id. Let's name this client my-test-client. Click on Save

Provide the Client ID and click on Save

What we have created so far is an OAuth2 client

We’d also need to create a new test user with which we can log in. For that, click on Users from the left panel, then click on Add User.

Click on Add user to create a new user

Only a username is required to create a user. Let’s name this user admin and click on Save. Once saved, click on Credentials, put in a password which you can remember, and turn off the Temporary button before clicking on Set Password button.

Set a new password

Once the client and the user has been configured, you can perform the following POST request using curl to get an access token:

curl -X POST http://localhost:8080/auth/realms/test/protocol/openid-connect/token \
--data "username=admin" \
--data "password=password" \
--data "client_id=my-test-client" \
--data "grant_type=password"

The response of this request would be something similar to the payload below:

"access_token": "eyJhbGciOiJSUzI1NiIsInR5cCIgOiAiSldUIiwia2lkIiA6ICJHS2pCb3lMV0lsYlNNVW1IMXhhZHFPNllaY0hvalhqZlBmMnluZ0hhajN3In0.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.BxmcDQKHcis3DQAJE-APpGsKRn3PkIvF1JhefVWqw4IkuQBwhFvDfVZMt27CC8cZdQEE5v5R_8wvIw4Ju69EQZVw2oqeN9JOvo5Sg9TxFw7dBrmMlPddIDSvbB8L7b4GklT3M75pUjIe2rTG91ZsSCFtFVP3Qj6V5iLPNBlVQWS9sMdVHPRM_fgltTSRetf-iKWox13DXz4cn3P5ARHMAJkj5tr8CNRp5cKJzCct0bQgIULlIhzx_tNdOlr39GwFqx_vjuOdGL-x_yy1uyMFMv-yZQn8KqsbJ5E7MIGQEVGKA31l5jFTYev2kgj8ZTFFeXwxReFcEqmVgVQTxNa2BQ",
"expires_in": 36000,
"refresh_expires_in": 98000,
"refresh_token": "eyJhbGciOiJIUzI1NiIsInR5cCIgOiAiSldUIiwia2lkIiA6ICI0NDM1MDllMi1kZTRhLTQ3ZDEtYTgzYi1lOTI3ZGFlNzJjMWUifQ.eyJleHAiOjE1OTY0ODI4NDMsImlhdCI6MTU5NjQ4MTA0MywianRpIjoiYTBhZjc0OWUtYThiYy00NTQ3LWIyODYtNzAxYjQ1NTBjNjA5IiwiaXNzIjoiaHR0cDovL2xvY2FsaG9zdDo4MDgwL2F1dGgvcmVhbG1zL3Rlc3QiLCJhdWQiOiJodHRwOi8vbG9jYWxob3N0OjgwODAvYXV0aC9yZWFsbXMvdGVzdCIsInN1YiI6ImYzM2Q3NGQ0LWE1ZWQtNGRhMC04MTdjLTUwM2U3NWE4MTQ2NSIsInR5cCI6IlJlZnJlc2giLCJhenAiOiJteS10ZXN0LWNsaWVudCIsInNlc3Npb25fc3RhdGUiOiJmODUzMDM1Mi0yOWIzLTQ3ZjAtYmZiNS05MTRiYzhiNjUzNmUiLCJzY29wZSI6ImVtYWlsIHByb2ZpbGUifQ.Olm0EjyvY5b-T6_eAr9zwTzYZsegrOsuWueO_cQLtYQ",
"token_type": "bearer",
"not-before-policy": 0,
"session_state": "f8530352-29b3-47f0-bfb5-914bc8b6536e",
"scope": "email profile"

The token you need is the value of access_token from above. If you focus on this value, it's actually 3 base64 encoded strings joined together through dots (.). Such a token is called a JSON Web Token or JWT in short. The part between the two dots is the payload which contains information about the user that we just used to generate the token. We can decode it as follows:

echo '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' | base64 -D

Which yields:

"exp": 1596517043,
"iat": 1596481043,
"jti": "24690fd3-bf00-450f-8937-1893cea8bf8a",
"iss": "http://localhost:8080/auth/realms/test",
"aud": "account",
"sub": "f33d74d4-a5ed-4da0-817c-503e75a81465",
"typ": "Bearer",
"azp": "my-test-client",
"session_state": "f8530352-29b3-47f0-bfb5-914bc8b6536e",
"acr": "1",
"allowed-origins": [
"realm_access": {
"roles": [
"resource_access": {
"account": {
"roles": [
"scope": "email profile",
"email_verified": false,
"preferred_username": "admin"

As you can see, the value of preferred_username is admin and the value of azp (authorization party) is my-test-client. Normally, a JWT can have any key-value pairs, but the ones returned in this one by Keycloak are special. The keys iss, sub, aud, exp, iat, acr, and azp are part of a standard called OpenID Connect. The exp value is an attached expiration with the token after which it should be considered invalid.

Respectively, the parts at either ends of the payload are header and the signature. The signature is literally the digital signature of the whole payload generated through a private key and an algorithm. The name of the algorithm and the identifier for the key-pair used to sign the payload are specified in the header.

The main advantage of a signed JWT is that if you have the public key and the algorithm information, you can simply verify the signature and once the signature is verified, you can trust the information in the payload to have come from a valid source (Keycloak Server). If you can trust the payload which contains information about the logged-in user, you can establish that the holder of this token is in-fact the user who's logged in.

So, in our demo REST API, all we have to do is expect the request to contain the token. If the token is there, validate its signature. Once the signature has been validated, we can establish the identity of the user who performed the request through preferred_username field.

Let's implement a REST endpoint /v1/self that returns the info of the logged-in user. You'd need to install the following pip packages:

pip install openidcpy==0.8 falcon==2.0.0 bjoern==3.1.0

You'd also need something called a Discovery URL, which can be found from the Keycloak Administration Console as the hyperlink value of OpenID Endpoint Configuration:

The URL behind OpenID Endpoint Configuration is the discovery URL

This URL would be something like http://localhost:8080/auth/realms/test/.well-known/openid-configuration and is used to discover metadata about the Keycloak server. Incidentally, this URL can also lead us to the public key required to verify the signature. When you open this URL in the browser, you’ll see something like:

"authorization_endpoint": "http://localhost:8080/auth/realms/test/protocol/openid-connect/auth",
"token_endpoint": "http://localhost:8080/auth/realms/test/protocol/openid-connect/token",
"jwks_uri": "http://localhost:8080/auth/realms/test/protocol/openid-connect/certs",
"userinfo_endpoint": "http://localhost:8080/auth/realms/test/protocol/openid-connect/userinfo",

Opening the URL specified against jwks_uri will give you all the public keys that this server has one of which will have the same id as specified in the header of the JWT. Other important endpoints specified here are authorization_endpoint and token_endpoint . We’ll use these endpoints later on to generate tokens.

For now, we’ll need to specify this URL as an argument to the client from openidcpy. Our implementation is as follows:

import falcon
from openidcpy import OidcClient
from json import dumps
import bjoern
discovery_url = 'http://localhost:8080/auth/realms/test/.well-known/openid-configuration'
client_id = 'my-test-client'
# Initialize the openidcpy client, this is going to validate the token signature
client = OidcClient(discovery_uri=discovery_url, client_id=client_id)
# A function to extract out the user information
def get_user(claims):
user = {'id': claims['sub']}
if 'email' in claims:
user['email'] = claims['email']
if 'given_name' in claims:
user['firstname'] = claims['given_name']
if 'family_name' in claims:
user['lastname'] = claims['family_name']
if 'preferred_username' in claims:
user['username'] = claims['preferred_username']
return user
class SelfApi(object): def on_get(self, req, resp):
# If a token isn't sent, we need to unauthorize the request
if req.auth is None:
raise falcon.HTTPUnauthorized('Unauthorized', 'Bearer token not provided')
# Tokens are usually sent as 'Bearer tokens' i.e. in the format
# 'Bearer <token>' against the 'Authorization' header
token = req.auth.split(' ')[1]
# We need to skip the verification of 'aud' for now
claims = client.validate_jwt(token, options={'verify_aud': False})
resp.body = dumps(get_user(claims))
resp.status = falcon.HTTP_200
except Exception as e:
raise falcon.HTTPUnauthorized('Unauthorized', e.args[0])
if __name__ == '__main__':
api = falcon.API()
api.add_route('/v1/self', SelfApi())
bjoern.run(api, '', 1234)

Pasting this code in a file and running it will expose this endpoint on http://localhost:1234/v1/self. Once this is done, we need to perform a GET request on this endpoint:

curl -H "Authorization: Bearer <PUT JWT TOKEN HERE>" http://localhost:1234/v1/self

Substitute the JWT token in the above call (without the <>) and press enter. This would yield:

"id": "f33d74d4-a5ed-4da0-817c-503e75a81465",
"username": "admin"


Keycloak comes with a full-fledged OpenID Connect Authorization server implementation which may require a steep learning curve which I hope you’ve been able to cover with this story. In the next part, we’d look into the way apps and services automatically generate tokens using the standard flows of OAuth2/OpenID Connect. You can check it out by clicking here.

Code Mechanic and Deployment Plumber, Curious for Details

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store